Installation · Coachella Valley
Natural stone installation
Marble, travertine, limestone, slate and quartzite — selected, sealed and set by someone who knows the difference.
Natural stone installation is the setting of quarried stone tile — marble, travertine, limestone, slate, quartzite — which, unlike porcelain, varies in color and density, can stain or etch, and needs white mortar, careful sorting and sealing to stay beautiful.
Stone is the material the valley's older estates were built with and the one porcelain keeps trying to imitate. Nothing imitates it well, but stone makes demands: travertine has holes that need filling, marble etches from anything acidic, slate is cleft and uneven, limestone is soft, and all of it needs a penetrating sealer and the right mortar so nothing bleeds through from below.
We've set every one of them. Stone gets laid out dry across the whole room first so the veining and color flow and you approve the arrangement before the mortar opens. White thinset under light stone, a membrane over the slab, honed or polished edges where they show, and sealer applied before grouting so the grout doesn't stain the stone.
01
What’s included
- Dry layout of every piece for color and vein matching, approved by you
- White, non-staining mortar under light and translucent stone
- Crack-isolation membrane so slab movement never reaches the stone
- Pre-sealing before grout, then a penetrating sealer after
- Hole filling on travertine, honing of cut edges, matched grout
- Care sheet for your stone: what cleans it and what will etch it
02
How it works
- 01
Choose the stone with eyes open
We look at your slab samples together and talk honestly about where each stone works: quartzite and dense marble for floors, softer stones for walls and low-traffic rooms.
- 02
Lay it out dry
Every piece is placed on the floor or wall unmortared so veining flows and odd pieces go where they belong. You approve the layout before we set.
- 03
Set, seal, grout, seal
White mortar, careful setting, a first seal, grout in a matched color, then the final penetrating sealer. We leave you the care instructions.
03
Natural stone by town
Rancho Mirage
Rancho Mirage estates with travertine throughout — we replace damaged pieces, refill and re-hone, and match new areas to thirty-year-old stone.
Indian Wells
Marble primary baths in Indian Wells, book-matched on the shower walls and sealed against the hard water.
Palm Desert
Limestone and travertine entries in Palm Desert's older communities, lifted from mud beds and reset over a membrane.
04
Fair questions
Which natural stone is best for a desert floor?
Quartzite and dense marble for high-traffic floors; travertine and limestone in honed finishes for a softer look that hides wear. All of them need sealing. For pool decks, light-colored limestone and travertine stay cooler underfoot than dark stone.
Does natural stone need to be sealed?
Yes, with a penetrating sealer after installation and again every couple of years depending on use. We seal before grouting so the grout can't stain the stone, and again after.
Why do you dry-lay the stone first?
Because every box is different. Laying it all out lets us blend color and veining across the room and put the odd pieces in closets and under cabinets. Once it's in mortar there's no moving it.
Free estimate
Need natural stone?
Tell us about the project. Josh comes out, measures and sends a written estimate — no obligation.
Worth reading first
Natural stone by town
Palm Desert · Indian Wells · La Quinta · Rancho Mirage · Palm Springs · Cathedral City · Indio · Bermuda Dunes
Let’s get it done right.
1.Tell us about the jobTwo minutes online, or one phone call.
2.We confirm a timeFree estimate, clear scope, honest price.
3.We show up and nail itOn schedule, spotless at the end of every day.
Mon–Sat 7am–6pm · Free estimates across the Coachella Valley